Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 30 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 2 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 7.6 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 1.3 mm.
Snap fit spacer with tension wing for a 4.5 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 19 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.6 mm for an M3 self tapping screw. Spacer length is 18.2 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 38.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 35 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 30 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 26 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 25 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 24.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 20 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 15 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 12.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 10 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 9.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 7 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 6.35 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 6 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 7.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 16 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 23 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 15.5 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 25.4 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 22.2 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 19.1 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 15.9 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 12.7 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 11.1 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 9.5 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 6.4 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 4.8 mm.
Double ended Christmas tree spacer allows to secure board, or soft sheet materials such as rubber to secondary panels. Also used for holding components onto panels. Spacer length is 1.8 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled holes. The winged arrowhead fits a 4 mm hole. Spacer length is 6.4 mm.
Snap lock spacer with a pilot hole of 1.6 mm and an arrowhead with tension wing with an anti-rotation provision for the chassishole. Spacer length is 13.7 mm.
Snap lock spacer with a pilot hole of 1.6 mm and an arrowhead with tension wing with an anti-rotation provision for the chassishole. Spacer length is 8.7 mm.
This blind hole circuit board spacer will press-fit into a 6 mm round threaded, punched or drilled holes. The arrowhead fits a 4 mm hole. Spacer length is 6.8 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 1.8 mm and an arrowhead for a rectangular mounting hole of 3 x 2 mm. Spacer length is 7.2 mm.
Rest support provided with pilot hole of 4 mm for a self-tapping screw provided with a two prong snap lock for a 2.2 mm mounting hole. Spacer length 25.4 mm.
Support post with a releasable two prong design for a top hole of 2.8 mm and an arrowhead fixation for a bottom hole of 2.8 mm. Spacer length is 6.3 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 19 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6.3 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 4.8 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a bottom hole of 3.2 mm with a two prong snap lock with tension wings. Spacer length is 7.6 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock with tension wings. Spacer length is 12 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock with tension wings. Spacer length is 9 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 16 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 12 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 7.9 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 7.9 mm.
Support post with a releasable two prong design for a top hole of 2.6 mm and an arrowhead fixation for a bottom hole of 2.8 mm. Spacer length is 1.6 mm.
Snap lock support. A locking two prong snaps in a 3.2 mm top and bottom panel hole. Spacer comes with an extended shoulder on one side for extra support. Spacer length is 12 mm.
Spacer fits a panel top hole of 3.9 mm with a two prong snap fit and a bottom hole panel of 3.9 mm with a two prong snap lock. Spacer length is 15.9 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 38.1 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 34.9 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 31.7 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 29.2 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 28.5 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 27 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 25.4 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 22.2 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 21 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 20.6 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 19.1 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 17.5 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 15.9 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 14.3 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 12.7 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 12 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 11.1 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 10 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 9.5 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 8.6 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 7.9 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 6.4 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 5.8 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 4.8 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 4 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 3.2 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 31.8 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 16 mm.
This series fits a panel top hole of 3.2 mm with a two prong snap fit. The bottom hole of 3.2 mm is secured with a two prong snap lock. Spacer length is 7.9 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 17.5 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 17.5 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 12.7 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 7.9 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 6.4 mm.
Spacer with additional support fits a panel top hole of 4 mm with a two prong snap fit and a bottom hole panel of 4 mm with a two prong snap lock. Spacer length is 5 mm.
Dual locking support post with extended shoulder on one side for extra support. 3mm snap fit top hole and 3 mm snap lock bottom hole. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 11.1 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 5.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 4.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 11.1 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 4.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 5.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 4.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 3.2 mm.
Reverse mount PCB spacer. Triple panel design. Minimum protrusion on chassis bottom. Fits 2 top panels with 4 and 4.5 mm panel holes. Snap in fixation for chassis hole of 5 mm. Spacer length 17.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 20 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 18 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 11 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 25 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 16 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 28.2 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 19 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 6.3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 4.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 4.8~5.0 mm. Spacer length 7.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 4.8~5.0 mm. Spacer length 4.5Â mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6.35 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 25.4 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 22.2 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 19.1 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 14.3 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 11.1 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 7.9 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 9.7 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 6.5 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 11.1 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Arrowhead fits panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Arrowhead fits panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Arrowhead fits panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 6.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Flat chassis mount design for 0.5 mm thickness and minimal protrusion. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 30 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 25.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 24 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 21.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 20 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 19 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 18 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 15.2 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 13.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Flat design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 35.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 25.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 19 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 11 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 6.3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5 mm. Spacer length 16 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5 mm. Spacer length 13.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 11 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.5 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3.2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 2.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 15.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 11 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.35 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4.8 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6.3 mm.