SSA4-5.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.

SS-10

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.

SS-10A

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.

SS-11

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.

SS-12

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.

SS-12A

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.

SS-14

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.2 mm.

SS-15

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15 mm.

SS-16

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.

SS-19

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.

SS-22

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.

SS-25

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.

SS-7.4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.4 mm.

SS-8

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.

SS-14.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.5 mm.

SS-17.2

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17.2 mm.

SS2-2.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS2-2.5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS2-2.5U

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS2-3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS2-3S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS2-4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS2-4S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS2-5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS2-5.4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.4 mm.

SS2-5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS2-6

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.

SS2-6S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.

SS2-8

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.

SS2-9.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.

SS1-2

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.

SS1-2.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS1-2.5L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS1-2.5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.

SS1-2L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.

SS1-2S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.

SS1-3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS1-3.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.

SS1-3.5L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.

SS1-3.5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.

SS1-3L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS1-3S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS1-4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS1-4.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.

SS1-4.5L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.

SS1-4.5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.

SS1-4L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS1-4S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS1-5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS1-5.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.

SS1-5.5L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.

SS1-5.5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.

SS1-5L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS1-5S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS1-6

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.

SS1-6L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.

SS1-6S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.

SS1-8L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.

SS3-7(1.3)

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.

SS-3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.2 mm.

SS-3.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.

SS-4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS-4.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.

SS-5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.8 mm.

SS-6

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.

SS-7

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.

SS-5A

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS4-11

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.

SS4-12

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.

SS4-12S

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.

SS4-16

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.

SS4-17

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17 mm.

SS4-19

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.

SS4-22

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.

SS4-25

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.

SS4-3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.

SS4-30

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 30 mm.

SS4-4

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.

SS4-4.6

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.6 mm.

SS4-5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.

SS4-6

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.

SS4-8

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.

SS4-9

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.

SSA-12.7

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.

SS4-16L

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.

CUS-5

Self retaining spacer with support base providing the desired spacing between the chassis and the PCB. Spacer length is 4.7 mm.

SS3.5-12.7

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.

SS3.5-15

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.

SS3.5-6.3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.

SS3.5-9.5

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.

SSU4-6.3

Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.

LUSA-11

Spacer Self Retaining

SOR-1

Spacer Self Retaining

SOR-2

Spacer Self Retaining